5. Capacity and resistance tables
5.1 General
The values displayed in the member capacity and resistance tables have been rounded to three significant figures.
Capacity and resistance tables are given for strength grades S275 and S355, except for cold-formed hollow sections, where tables are given for grade S355 only.
3.1.1
5.2 Design strength
The member capacity and resistance tables have been based on the following values of design strength py.
Table 9
Steel Grade |
Flange Thickness less than or equal to (mm) |
Design strength py (N/mm2) |
S275 |
16 |
275 |
40 |
265 |
63 |
255 |
80 |
245 |
100 |
235 |
150 |
225 |
S355 |
16 |
355 |
40 |
345 |
63 |
335 |
80 |
325 |
100 |
315 |
150 |
295 |