12. References

  1. BRITISH STANDARDS INSTITUTION       
    BS 5950  Structural use of steelwork in building
    BS 5950-1: 2000  Code of Practice for design – Rolled and welded sections
    BS 5950-2: 2000  Specification for materials, fabrication and erection:  Rolled and welded sections
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10025: 1993  Hot rolled products of non-alloy structural steels. Technical delivery conditions (including amendment 1995)
    Replaced by BS EN 10025-2:2004
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10113  Hot rolled products in weldable fine grain structural steels              
    BS EN 10113-1: 1993  General delivery conditions. (Replaces BS 4360:1990)
    Replaced by BS EN 10025-3:2004 and BS EN 10025-4:2004
  1. BRITISH STANDARDS INSTITUTION       
    BS4 Structural steel sections
    BS4-1: 1993  Specification for hot rolled sections       
    (Including amendment 2001)
    Replaced by BS EN 10365:2017
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10034: 1993  Structural steel I and H sections.  Tolerances on shape and dimensions           
    (Replaces BS 4-1: 1980)
  1. BRITISH STANDARDS INSTITUTION
    BS EN 10024: 1995  Hot rolled taper flange I sections.  Tolerances on shape and dimensions
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10279: 2000  Hot rolled steel channels.  Tolerances on shape, dimension and mass
    (Including amendment 1, amendment 2: 200)
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10056 Specification for structural steel equal and unequal angels             
    BS EN 10056-1: 1999  Dimensions (Replaces BS 4848-4: 1972)
    BS EN 10056-2: 1999  Tolerances on shape and dimensions (Replaces BS 4848-4: 1972)
    Replaced by BS EN 10056-1: 2017
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10210 Hot finished structural hollow sections of non-alloy and fine grain structural steels
    BS EN 10210-1: 1994  Technical delivery requirements (Replaces BS 4360: 1990)
    Replaced by BS EN 10210-1:2006
    BS EN 10210-2: 1997  Tolerances, dimensions and sectional properties. (Replaces BS 4848-2: 1991)
    Replaced by BS EN 10210-2:2006
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 10219  Cold formed welded structural sections of non-alloy and fine grain steels
    BS EN 10219-1: 1997  Technical delivery requirements
    Replaced by BS EN 10219-1:2006
    BS EN 10219-2: 1997  Tolerances and sectional properties. (Replaces BS 6363: 1983)
    Replaced by BS EN 10219-2:2006
  1. Structural sections to BS 4: Part 1: 1963 and BS EN 10056: 1999
    Corus Construction and Industrial Sections, 03/2001
  1. NETHERCOT, D.A., SALTER, P.R. and MALIK, A.S.
    Design of members subject to combined bending and torsion (SCI-P057)             
    The Steel Construction Institute, 1989
  1. Advisory Desk Note No 195             
    New Steel Construction – Vol. 5 (3) June/July 1997
  1. MORREL, P.J.B   .
    The behaviour of rectangular hollow section steel beams under concentrated flange loading.
    PhD Thesis, CNAA             
    Brighton University, January 1971].
  1. SALTER, P.R.      
    Assessment of design using cold-formed hollow sections           
    RT652   
    The Steel Construction Institute, 1998
  1. KLEINLOGEL, A.              
    Rigid frame formulas (translated from German; page 418)
    Frederick Ungar Publishing Co., 1958
  1. BRITISH STANDARDS INSTITUTION       
    BS 4190: 2001  ISO metric black hexagon bolts, screws and nuts - Specification
  1. BRITISH STANDARDS INSTITUTION       
    BS 4395   Specification for high strength friction grip bolts and associated nuts and washers for structural engineering               
    BS 4395 -1: 1969  General grade (including amendments 1, amendments 2: 1997)            
    BS 4395 -2: 1969  Higher grade bolts and nuts and general grade washers (including amendment 1, amendment 2: 1976)
    BS 4395 is current (and may be used) although superseded by the six Parts of BS EN 14399
  1. BRITISH STANDARDS INSTITUTION       
    BS 4604  Specification for the use of high strength friction grip bolts in structural steelwork.  Metric series
    BS 4604-1: 1970  General grade (including amendment 1, amendment 2, and amendment 3: 1982)
    BS 4604-2: 1970 – Higher grade (parallel shank) (including amendment 1, amendment 2: 1972)
  1. BRITISH STANDARDS INSTITUTION       
    BS 4933: 1973  Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 440: 1995  Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels.  Classification
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 499: 1995  Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain.  Classification
    Replaced by BS EN ISO 2560:2005
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 756: 1996  Welding consumables. Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels.  Classification
    Replaced by BS EN 756:2004
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 758: 1997  Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels.  Classification
  1. BRITISH STANDARDS INSTITUTION       
    BS EN 1668: 1997  Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels.  Classification
  1. Steel designers’ manual – Fifth Edition
    The Steel Construction Institute and Blackwell Science, 1994
    Replaced by the Sixth Edition, SCI and Blackwell Publishing, 2003